Kev siv txhua hnub ntawm cov casters txav tau kuj yuav tsum muaj qee qhov kev ua haujlwm niaj hnub, uas yog, kev saib xyuas txhua hnub, lossis siv kev ceev faj, kom cov casters txav tau ntev dua.
1. In order to better avoid accidents and after long-term use, please do a timely inspection and maintenance.
2. Generally, please check whether the movable installation place and the drive shaft are loose, and whether the casters are damaged, cracked, or deformed. Determine if the rotation axis of the wheel is tightened. If the joints of the movable casters are loose or abnormal, please dismantle and replace them immediately.
3. When the movable caster is embrittled, damaged, etc., the application situation is abnormal, please immediately remove and replace. (Prevent only partial disassembly and replacement of casters)
4. If dirt is caught in the rotation position of the base plate and the position of the movable caster wheel, please remove it immediately, otherwise it will cause poor rotation.
5. The lubrication of the casters, including the lubrication of the movable brackets, is the core of the flexible turning of the movable casters. If the lubrication here is not good, the turning will not be so flexible, and there may be stuck and unsmooth turning. Lubrication of movable caster wheel bearings. If the lubrication is not enough, the smoothness of the forward and backward of the caster will be affected, which may cause jams or increase the noise.
In short, not only the movable casters need to pay attention to these maintenance points, but other types of casters also need to pay attention to some details during the use process. When it is found that it has been seriously worn out and cannot be used normally, it should be replaced in time. Don't wait until it can't be used. Changing!
